Epoxy Resin - Casting System | E300GB
TOP
Epoxy Resin - Casting System | E300GB
The Epoxy-System E300GB is an unfilled, low-viscosity combination of resin and hardener with working time (pot life) more than 300 minutes.*
Usable for epoxy casting of medium thickness (up to approx. 50mm* depending on surface, temperature geometries and casting quantity (volume) - further information: technical data sheet).
Features & Benefits:
-
Casting applications up to 5 cm layer height
-
Several casting levels possible
- Forms a clear, tack-free surface
- Good mechanical properties
- High impact resistance
- Cold-curing, usable from 18 ° C
Casting applications up to 5 cm, decorating, making jewelery yourself, pouring table tops
The addition of the UV stabilizer BEL91 (in epoxy resin) increases the long-term stability! Also, this system can be coloured with our colour pigments, colour pastes or dyes.
Notes:
All raw materials are free of nonylphenol or DETA!
Technical Data Epoxy Resin E300GB
- Working Time (pot life): 300 min (at 20 °C or 68 °F)
- Mixing ratios: 100 parts resin / 35 parts hardener (by weight)
- Low viscous
-
Low exothermic, high layer thicknesses possible
Download:
Technical Data (PDF)
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Caution
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Caution
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
.jpg "Preview: Colour Pigments Opaque | FD")
