Fiberglass fabric 163 g/m² | GF160KF
Fiberglass fabric 163 g/m² | GF160KF
Preview: Fiberglass fabric 163 g/m² | GF160KF
Preview: Fiberglass fabric 163 g/m² | GF160KF
Fiberglass fabric 163 g/m² | GF160KF
Fiberglass fabric 163 g/m² | GF160KF
Fiberglass fabric 163 g/m² | GF160KF
Mobile Preview: Fiberglass fabric 163 g/m² | GF160KF
Mobile Preview: Fiberglass fabric 163 g/m² | GF160KF

Fiberglass fabric 163 g/m² | GF160KF

Product No.:
HP-T163EF
ca. 1-3 days ca. 1-3 days (abroad may vary)
Sliding scale prices
1-2 m²
per 6,55 EUR
3-4 m²
per 6,28 EUR
5-9 m²
per 6,02 EUR
10-24 m²
per 5,50 EUR
25-49 m²
per 4,97 EUR
50-99 m²
per 4,45 EUR
> 99 m²
per 3,80 EUR
6,55 EUR

incl. 19% tax excl. Shipping costs

Add to wish list
Ask about product
Description

163 g/m² Fiberglass fabric | GF160KF

Weight: 163 g/m²
Weave: Twill
Sizing: Finish
Width: 100 cm

Areas of application:
Model making, sandwich components, boatbuilding, ...

Calculated data for hand laminate with 35 volume percent fibres:
Resin consumption: 136 g/m²
Laminate thickness: 0,18 mm
Laminate weight: 302 g/m²

Product Safety
Product Safety (GPSR):
Here you will find information for the safe use of glass fibres:
Product information for safe handling (PDF)

Customers who bought this product bought also the following products:

83 g/m² Peel Ply | GA83L10
83 g/m² Peel Ply | GA83L10
Weight: 83 g/m²
Width: 100 cm
Weave: Plain
Material: Nylon 6.6 cleaned
3,75 EUR
Epoxidharz Mehrzwecksystem (mittelviskos) | E25KL
Epoxy Resin multi-purpose system (medium...
  • 2K Epoxy Resin multi-purpose system
  • Medium viscous
  • 25 min Pot life
  • Applicable from 5°C


Laminating-, Mould making-, Bonding -, Covering laver

from 10,90 EUR
Microballons | HP-MB2
Microballoons | MB2
  • Mixing of pressure-resistant, non-combustible
  • Reduced-shrinking molding compounds
  • Mixture remains very fluid (due to spherical structure)
  • Creation of lightweight putties
from 3,90 EUR
High-Gloss Release Agent | HGR5
High-Gloss Release Agent | HGR5
  • Water based release agent for applications with In-Mould Coatings (HP-IMC) from HP-Textiles.
  • Also suitable for solvent free epoxy resins, unsaturated polyester resin and vinyl ester resins.
  • Fast drying time (per layer <5 minutes at 20°C)
  • Semipermanent, external release agent with good demoulding features
  • Minimises remains on the moulds’ surface – and at the same time no transmission to the component
from 9,88 EUR