Filler System - Epoxy Resin | HP-E30S
Epoxy filler with fine extenders | HP-E30S
The epoxy filler HP-E30S is a filled two component combination of resin and hardener with fine extenders. This filler has very good adhesion to wood, steel, polyester and other surfaces. HP-E30S is solvent-free and therefore low unpleasant odour. Further more is this epoxy filler suitable for permanent immersion in (sea) water.
Features & Benefits:
-
Working time: approx. 30 minutes
-
Dust dry after approx. 120 minutes
-
Easy to send
-
Colouring: Light green - flat
-
Very good adhesion to wood, steel, polyester and other surfaces provided with fine extenders
-
Water vapour impermeable
-
Semi-flexible
-
Resistant to various chemicals
-
Among other, usable for osmosis treatment
-
Solvent-free
Technical Data Epoxy System HP-E30S
| Colouring: | light green- flat |
| Mixed Viscosity: | pasty |
| Working Time (pot life): | 30 minutes (at 20°C) |
Download:
Technical Data (PDF)
Technical Data (PDF)
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Epoxy resin for boat building (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Warning
H411 Toxic to aquatic life with long lasting effects.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H317 May cause an allergic skin reaction.
Hardener:
Danger
H314 Causes severe skin burns and eye damage.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.
H317 May cause an allergic skin reaction.
.jpg "Preview: Colour Pigments Opaque | FD")
