Epoxy Resin - Casting System | E300GB
TOP
Epoxy Resin - Casting System | E300GB
The Epoxy-System E300GB is an unfilled, low-viscosity combination of resin and hardener with working time (pot life) more than 300 minutes.*
Usable for epoxy casting of medium thickness (up to approx. 50mm* depending on surface, temperature geometries and casting quantity (volume) - further information: technical data sheet).
Features & Benefits:
-
Casting applications up to 5 cm layer height
-
Several casting levels possible
- Forms a clear, tack-free surface
- Good mechanical properties
- High impact resistance
- Cold-curing, usable from 18 ° C
Casting applications up to 5 cm, decorating, making jewelery yourself, pouring table tops
The addition of the UV stabilizer BEL91 (in epoxy resin) increases the long-term stability! Also, this system can be coloured with our colour pigments, colour pastes or dyes.
Notes:
All raw materials are free of nonylphenol or DETA!
Technical Data Epoxy Resin E300GB
- Working Time (pot life): 300 min (at 20 °C or 68 °F)
- Mixing ratios: 100 parts resin / 35 parts hardener (by weight)
- Low viscous
-
Low exothermic, high layer thicknesses possible
Download:
Technical Data (PDF)
Working notes and decision guidance for Epoxy Resins
Below you will find processing information for epoxy resins, safety notes and also a decision guide for helping choosing the correct epoxy system.Practical tips for epoxy resins (PDF)
Decision guidance epoxy resins (PDF)
Hazard Statements
Resin:
Caution
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H411 Toxic to aquatic life with long lasting effects.
Hardener:
Caution
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
